Family 17

Recommended bearing type for sliding systems, with or without thermal break. Optimal for large-sized and heavy sliding doors. Recommended for double-glazed (triplex) glass combined with laminated glass.

The range of Woorbel bearings provides an adequate response to the demanding market needs. Whether with or without thermal break, anticorrosive, or of small or large dimensions, they always offer excellent performance in terms of weight capacity and smooth sliding.

One of Woorbel’s differentiating points is its ability to customize the system according to the specific needs of each client.

GENERAL FEATURES:

• Frame, wheel holder, and pivot axle made of aluminum 6063T5.
• Possibility of anodized finish for the entire assembly.
• Needle bearings with optional Corrotect® anticorrosive finish.
• Wheel axles of 6, 8, and 10 mm made of stainless steel AISI 420.
• Stainless steel A2 screws throughout the system.
• Wheels manufactured with special extruded resins offering high resistance to friction wear and weight-induced deformation.
• Certified under UNE-EN 1670:2007 and UNE-EN 1670:2007/AC:2008 for “Durability Test of 25,000 cycles” and “Static Load Resistance Test at room temperature” for product families 10, 15, 20, 30, and 35, carried out by Applus Laboratories.
• Certified under UNE-EN 13126-15 for “Accelerated Corrosion Test in Neutral Salt Spray Chamber” on anodized bearings, performed by Applus Laboratories, with grade 5 classification.